Microphone arms for gaming, streaming and podcasting.
Experience our brand new dual monitor arm.
MICROPHONE COMPATIBILITY
Find your microphone below for a quick compatibility check.
models found
| Brand | Microphone | Weight | SA-10 | SA-30 | SA-30 LP | Mount & adapter |
|---|---|---|---|---|---|---|
AT2020 |
Weight345 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included pivot mount. | |
AT2020USB+ |
Weight386 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included pivot mount. | |
AT2020USB-X |
Weight373 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Thread adapter supplied with the microphone. | |
AT2035 |
Weight403 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included AT8458 shock mount; add its weight. | |
AT2040 |
Weight615 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included AT8487 mounting clamp. | |
AT2040USB |
Weight600 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included AT8487 mounting clamp. | |
ATR2100 USB |
Weight268 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included microphone clip. | |
Mic |
Weight751 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Tighten the ribbed mounting collar, then adjust the smooth collar. | |
Wave DX |
Weight440 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the included swivel mount. | |
Wave Neo |
Weight450 g* published weight without riser; includes desk base | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 1/4" / 3/8" / 5/8"Remove desk stand; adjust the pre-installed thread insert. | |
Wave:1 |
Weight245 g* mic + U-mount | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8"Keep the included U-mount; no desk base. | |
Wave:3 |
Weight280 g* mic + U-mount | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 1/4" / 3/8" / 5/8"Use the U-mount and Elgato boom-arm adapter. Original Wave:3. | |
B20 |
Weight530 g* with cable | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8"Remove the desk base; keep the microphone bracket. | |
AM8 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Mount directly with either included Sensic adapter. | |
K668 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Keep the original mic mount and attach it to the arm. | |
K669 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Keep the original mic mount and attach it to the arm. | |
K670 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Keep the original mic mount; the Sensic adapters cover both threads. | |
K678 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Keep the original mic mount; the Sensic adapters cover both threads. | |
K683 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse the mounting joint supplied with the microphone. | |
K688 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Mount directly with either included Sensic adapter. | |
T669 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountKeep the shock mount supplied in the T669 boom-arm kit. | |
T732 |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountKeep the shock mount supplied in the T732 boom-arm kit. | |
QuadCast |
Weight254 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Use the HyperX mounting adapter supplied with the mic. | |
QuadCast 2 |
Weight335 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Attach through the included shock-mount joint. | |
QuadCast 2 S |
Weight345 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Attach through the included shock-mount joint. | |
QuadCast S |
Weight255 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Use the HyperX mounting adapter supplied with the mic. | |
SoloCast |
Weight261 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Remove the desk stand; mount at the threaded underside. | |
Baby Bottle |
WeightNot published* manufacturer no longer publishes original-model weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Compatible shock mountUse the shock mount made for the original Baby Bottle. Original model, not Baby Bottle SL. | |
Snowball |
Weight460 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the tripod base. | |
Snowball iCE |
Weight460 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the tripod base. | |
Yeti |
Weight550 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the heavy desktop base. | |
Yeti GX |
Weight616 g* published product weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 1/4"SA-10 requires the adapter supplied with the mic. SA-30 and SA-30 LP can also use their 1/4-inch fitting. | |
Yeti Nano |
Weight630 g* with desk stand; mounted weight is lower | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Use mic adapterUse the stand adapter supplied with the mic. Remove desk base. | |
Yeti Orb |
Weight230 g* published product weight | SA-10✕ No | SA-30✓ Yes | SA-30 LP✓ Yes | 1/4"SA-10 has no 1/4-inch adapter. SA-30 and SA-30 LP include the required fitting. | |
Yeti X |
Weight519 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the desktop base. | |
A04H |
WeightNot published* mic-only weight not published; kit weight excluded | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountA04H uses the A04 microphone and supplied shock mount. | |
A04T |
WeightNot published* mic-only weight not published; kit weight excluded | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountA04T uses the A04 microphone and supplied shock mount. | |
A04TC |
WeightNot published* mic-only weight not published; kit weight excluded | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountA04TC uses the A04 microphone and supplied shock mount. | |
AU-A04 |
WeightNot published* mic-only weight not published; kit weight excluded | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountKeep the supplied shock mount; the microphone is sold in a boom-arm kit. | |
PD200X |
Weight314 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Use the supplied shock mount and thread adapter. | |
PM422 |
WeightNot published* mic-only weight not published; kit weight excluded | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original shock mountKeep the supplied shock mount; the microphone is sold in a boom-arm kit. | |
550 |
Weight363 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse the included hard mount. | |
770 |
Weight454 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse the supplied shock mount. | |
990 |
Weight544 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse its microphone mount; count shock-mount weight too. | |
991 |
Weight159 g | SA-10✕ No | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse the included microphone clip. One mic per arm. | |
BCD-1 |
Weight567 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountKeep the attached swivel mount. | |
V67G |
Weight395 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountUse the supplied hard mount. | |
Capsule |
Weight314 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Use mic adapterRemove desk base and fit the supplied boom-arm adapter. Original Capsule. | |
Seiren Mini |
Weight282 g* published product weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the desk stand and mount directly to the 5/8-inch thread. | |
Seiren Pro |
WeightNot published* manufacturer does not publish detached mounted weight | SA-10✕ No | SA-30✕ No | SA-30 LP✓ Yes | Razer shock mountNot recommended for the SA-10: the mounted microphone and shock mount exceed its safe 1.2 kg working range. | |
Seiren V3 Mini |
WeightNot published* manufacturer does not publish mic-only weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Remove the desk stand and mount at the threaded underside. | |
Seiren X |
Weight383 g* published product weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic mountRemove the desktop base. Original Seiren X, not V2 X. | |
NT-USB |
Weight520 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Keep the supplied ring mount; remove the tripod. | |
NT-USB Mini |
Weight585 g* published product weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Remove magnetic base; keep the swing mount and supplied adapter. | |
NT1000 |
Weight682 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Use the included RM2 ring mount. | |
PodMic |
Weight937 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"SA-30: only 63 g spare for extras. LP gives more headroom. | |
Procaster |
Weight695 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 3/8" / 5/8"Use the included RM2 mount. Weight follows the current manual. | |
C01U USB |
Weight480 g* published product weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original swivel mountUse the included swivel mount. Original C01U, not C01U Pro. | |
C02 Pencil |
Weight170 g | SA-10✕ No | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic clipUse the supplied shock-mounted clip. One mic per arm. | |
Q1 |
Weight240 g* manufacturer manual weight | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic clipUse the included microphone clip. Original condenser Q1, not Q1U. | |
Q2U USB/XLR |
Weight320 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | Original mic clipUse the supplied microphone clip; remove the tripod. | |
MV7 |
Weight550 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the attached yoke. | |
MV7+ |
Weight573.5 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the attached yoke. | |
MV7i |
Weight567 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the attached yoke. | |
PGA48 |
Weight300 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the microphone clip. | |
PGA58 |
Weight294 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the microphone clip. | |
SM48 |
Weight370 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the microphone clip. | |
SM58 |
Weight330 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the microphone clip. | |
SM7B |
Weight764 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the yoke; needs 7 mm exposed thread and XLR clearance. | |
SM7dB |
Weight837 g | SA-10✓ Yes | SA-30✓ Yes | SA-30 LP✓ Yes | 5/8"Use the yoke; needs 7 mm exposed thread. SA-30: 163 g left for extras. |
No match? Send us your microphone model and we’ll check it for you. Ask Sensic
Yes = fits with the mount and adapter noted. Include shock mounts and accessories in the total load: SA-10 200–1,200 g; SA-30 up to 1,000 g; SA-30 LP up to 2,000 g. SA-10 includes 3/8″ and 5/8″ fittings only.
Weights come from manufacturer specifications where available. Figures with * include a stand, mount or other items as noted. Not published means the manufacturer does not provide a reliable microphone-only weight. Check means the required mounted weight or fitting could not be confirmed from the manufacturer’s specifications. Fit is assessed from manufacturer specifications and mounting instructions, not physical testing.
Find your next microphone arm or add RGB lighting to your workspace.
Low profile
Microphone arms
RGB lighting
Shop All Products
SENSIC · LEVEL UP YOUR WORKSPACE