Two screens, but not enough room for your keyboard, mouse and notes? A dual monitor arm removes the monitor stands from your desk and lets you position each screen independently. Choosing the right one starts with your monitors and your workspace.
This buying guide helps you choose a type of monitor arm, identify the measurements to check and decide whether our MA-20 is right for your setup.
What should you look for in a monitor arm for two screens?
1. Check each monitor's weight without its stand
Each arm must support its own monitor. Find the weight without the stand or base in your monitor's specifications. Two monitors with the same screen size can have different weights.
Check the minimum weight as well. A spring-assisted arm needs a monitor within its specified weight range to be adjusted properly. Staying below the maximum is not the only requirement.
The MA-20 supports 2–9 kg per screen . You cannot freely distribute the total load across both arms: one monitor weighing 10 kg and another weighing 4 kg do not meet this specification.
2. Look beyond the screen diagonal
An arm for two 27-inch screens is not automatically compatible with every 27-inch model. The actual width of each monitor and your intended screen positions matter too, alongside weight and mounting compatibility.
Want two 32-inch monitors side by side? Measure their housings and decide where the inner screen edges should sit. Then check whether the arms can reach those positions. A maximum screen size alone does not guarantee every arrangement.
The MA-20 is specified for 17–32 inches per screen. A 34-inch ultrawide falls outside that range, even if it weighs less than 9 kg.
3. Check the VESA mounting pattern
VESA here describes the hole pattern used to attach the screen to the arm. For VESA 100 × 100 mm, the horizontal and vertical distance between the centres of the mounting holes is 100 mm.
The MA-20 supports 75 × 75 and 100 × 100 mm . Check both monitors. If the mounting area is recessed, make sure there is room for the plate, and follow the monitor manufacturer's instructions for the correct screws. Do not assume direct compatibility if your screen lacks a suitable mounting pattern.
4. Measure your desk and inspect the mounting point
The thickness of your desktop determines whether a clamp fits. Look underneath as well: a metal frame, cable tray or angled edge can obstruct the intended mounting point.
The MA-20 has two different thickness ranges:
- Desk clamp: desktop thickness of 10–80 mm.
- Grommet mount: desktop thickness of 10–40 mm.
The clamp attaches to a suitable desk edge. Grommet mounting uses an appropriate hole through the desktop. Both mounting options are included. Check that the desktop can support the arm and both monitors at the mounting point.
5. Consider reach, the wall and your cables
An arm may meet the weight requirements yet still be unable to reach your desired screen position. Decide whether your main monitor needs to sit directly in front of you, whether you use both screens equally and how much room is available behind the desk.
Is your desk against a wall? Check how the arms fold. The MA-20 has a specified full arm extension of 461 mm. This does not state the required distance from a wall; that depends on the positions of the arms and monitors.
Allow enough power and display cable length for movement. Neatly routed cables should not become taut when you rotate a monitor or pull it towards you.
Which is better: a dual monitor arm or two separate arms?
That mainly depends on your intended screen positions and the available mounting points. These three approaches are worth comparing:
| Solution | Useful when you… | Check… |
|---|---|---|
| Dual mount with independently adjustable arms | Want to position two monitors from one base and adjust each separately. | Whether both intended screen positions can be reached from the same mounting point. |
| Dual mount with a fixed height or crossbar | Mainly use both screens in one fixed position. | How height and screen spacing are adjusted; this varies between models. |
| Two separate monitor arms | Want mounting points farther apart or have an unusual arrangement. | Whether you have two suitable mounting points and enough reach from each arm. |
The MA-20 belongs to the first category. It uses one base on your desk and lets you adjust both screens independently. This makes it an option for a main screen alongside another for chat, documents or streaming software.
When is the Sensic MA-20 a good choice?
The Sensic MA-20 is an option if you have two compatible monitors, want to replace their separate stands and need to tilt, swivel and rotate each screen independently. Adjust the spring tension to suit the weight of each monitor.
At the time this guide was checked, the MA-20 costs €59.99 . Find current pricing and availability on the Sensic MA-20 product page .
Specifications at a glance
| Feature | Sensic MA-20 |
|---|---|
| Number of screens | 2, independently adjustable |
| Screen size | 17–32 inches per screen |
| Weight | 2–9 kg per screen |
| VESA | 75 × 75 and 100 × 100 mm |
| Tilt / swivel | ±90° / ±90° |
| Screen rotation | ±180° |
| Full arm extension | 461 mm |
| Desktop thickness, clamp | 10–80 mm |
| Desktop thickness, grommet | 10–40 mm |
| Cable routing | Integrated |
| Included | Dual monitor arm, desk clamp, grommet mount and mounting hardware |
For working from home, gaming and mixed screen arrangements
Do you use one monitor for your main task and the other for supporting information? Position the main screen towards your usual seating position and adjust the second accordingly. If you use both equally, try an arrangement that lets you comfortably look between them.
You can also rotate a screen into portrait orientation for long documents or chat. Check the clearance below the screen and your cable length. The monitors do not need to be the same model, provided each meets the requirements and the intended arrangement fits.
When should you choose something else?
Look for another solution if either screen falls outside the 17–32-inch or 2–9 kg range, needs another VESA mounting pattern or your desk lacks a suitable mounting point. The same applies if you want to stack the screens: supporting two monitors does not automatically mean a mount supports stacking.
If space behind the desk is very limited or your intended screen positions are far apart, compare the mounting geometry with other models or consider two separate arms. The best dual monitor arm is the one that can actually accommodate your arrangement.
How to check whether the MA-20 fits before ordering
- Identify both monitor models. Look up the size, weight without the stand and VESA pattern for each.
- Check each screen separately. For the MA-20: 17–32 inches, 2–9 kg and VESA 75 × 75 or 100 × 100 mm.
- Measure the mounting point. Check desktop thickness, access underneath and whether the desktop is suitable.
- Decide on screen positions. Measure monitor widths and allow for the wall, the arms and any portrait screen.
- Check your cables. Make sure they can follow the intended movements before securing them in the cable guides.
After installation, adjust the spring tension of each arm according to the supplied instructions. Check the movement of both screens, then route the cables. See the official MA-20 product page for product information and the instruction guides page for manuals.
Frequently asked questions about dual monitor arms
Which arm fits two 27-inch monitors?
The Sensic MA-20 is suitable if each 27-inch monitor weighs 2–9 kg without its stand and uses VESA 75 × 75 or 100 × 100 mm. Check your desk and intended screen positions as well.
Can the MA-20 support two 32-inch monitors?
The MA-20 supports up to 32 inches and 2–9 kg per screen. Two 32-inch monitors are therefore within the stated size range, provided their weight, VESA pattern and intended arrangement also fit.
Can you use two different monitors?
Yes, if each independently meets the specifications. Differences in screen height, width and VESA mounting position may affect how you align the edges.
Does a dual monitor arm fit every desk?
No. For the MA-20, the desktop must be 10–80 mm thick for the clamp or 10–40 mm for grommet mounting. The desktop construction and access to the mounting point must also be suitable.
Is the MA-20 suitable for a 34-inch ultrawide?
A 34-inch screen falls outside its specified 17–32-inch range. Choose an arm explicitly rated for your monitor's size, weight and mounting pattern.
Low profile
Microphone arms
RGB lighting